| General Specifications |
|
Metal Loss measurements
|
Erosion |
| Design life |
>25 years |
| Design pressure |
10KSI or 15KSI* |
| Hydrostatic test pressure |
Design pressure x 1.5 |
| Design temperature range ** |
-40 to 177°C |
| Ambient operating temperature |
-20 to 70°C |
| Design depth |
3000m |
| Hyperbaric test pressure |
450bar |
| Paint options |
Standard sensor is unpainted. Optional Norsok M-501 System 7 paint system available. |
| Design codes and standards |
API 6A / 17D, ASME IX, API 17F, |
| NACE MR-0175, all process wetted material supplied with 3.1 traceable certification |
|
| |
|
| |
|
| |
|
| CEION ® Measurement |
|
| Sensing element |
Spark eroded spiral |
| Element material |
Inconel 625 |
| Element thickness |
6mm angled; 8mm flush |
| Element life |
5mm angled; 7 mm flush |
| Resolution |
45nm |
| |
|
| |
|
| Mechanical Specification |
|
| Mechanical interface |
API 6A 2 1/16 |
| Seal groove |
BX152 |
| Approx weight in air |
23kg (add 4 kg for 15K) (Probe weight only) |
| Flange material |
10K: Duplex UNS S31803 with Inconel 625 UNS N06625 cladding in process wetted area |
|
15K: Super Duplex UNS S32760 with Inconel 625 UNS N06625 cladding in process wetted area |
| |
|
| Electronics Housing material |
316L SS |
| Jumper Interface |
Omnitec Mk2 |
| Primary and Secondary |
|
| Penetrators |
Glass-to-Metal, Inconel 625 (EB welded) |
| Probe Neck Material |
Inconel 625 |
| Termination Shell material |
316L SS |
| Probe diameter |
50mm |
| Probe length |
Selectable between 100 and 300mm |
| Electrical Specification |
|
| Supply Voltage |
24VDC (18V min, 30V max) |
| Current consumption |
<50mA @24VDC |
| In-rush |
120% max operating current for 500ms |
| Output signal |
CANbus (CiA443, SIIS Level 2) or Modbus (RS485)
|
