CCP connectors are supplied as standard on a double-ended assembly, or with a robust molded ST connectors on the second end. Teledyne PDM offers a standard cable, PDM 140, from stock, which can be used for either single mode or multi-mode applications. Cable can also be customer specified, but as cable types containing optical fibers are both varied and complex, their termination is often unique to each type. As such, details should be furnished with the request for quotation, so that Teledyne PDM can consider any design implications.
The 0-ring sealing face for the BCR connector must be 14mm diameter minimum, of a surface fi nish of 0.8 micrometers and lightly smeared with silicone grease. The connector uses a single face seal. The mounting thread required is 5/16” - 24 UNF, 2B, the axis of which must be perpendicular to the sealing face. The user must ensure suitable compatibility between materials when using connectors in seawater to avoid bimetallic corrosion. The BCR connector is supplied as standard with an MU type connector. Adaptor patch cables are available on request. Any installation of the BCR connector must allow the jacketed fiber, on the dry-side, up to .08mm of movement during mating and unmating.
